2007-2012 BMW 135i/335i N54 & N55 Street Intercooler Upgrade Kit with lower CP upgrade
This listing includes the lower charge pipe upgrade. Required for 09+ vehicles. It can be used on 07-08 vehicles also.
Replace your overheated factory intercooler with the VRSF upgraded intercooler kit to get the most out of your N54/N55. We designed this kit to be one of the best performing, direct bolt on intercoolers available for your BMW with special attention to quality and performance while maintaining a reasonable price. Our intercoolers allow for higher HP gains, mainly due to their ability to keep intake temps down while preventing heat soak which is a common problem with the factory intercooler. This results in a more power and increased reliability with reduced chances of pre-detonation & knock.
The most important component of any intercooler is the core. The core cools the charged air from the turbo before it enters the engine and the OEM BMW tube and fin intercooler is designed to support low boost levels and air flow. Once boost levels and air flow are increased, the OEM unit is easily overwhelmed and can not keep up with the cooling demands of a tune running more than OEM boost levels. This results in heatsoak which will result in a power loss and a higher potential for pre-detonation in the upper RPM range.
We remedy this problem with our custom bar and plate core design which utilizes a staggered and offset high density internal and external fin pack. Our core has been carefully tuned to provide the the best intake temperature reduction while maintaining minimal pressure drop. Our bar & plate core is also much more durable than the OEM tube and fin core, with a better ability to withstand rocks and other debris.
Our 5" core is recommended for those with goals of 300-500whp. We recommend our 7" intercooler for individuals requiring the utmost intake temperature reduction, ranging from the stock turbo setup to single turbo.
Finish & Construction
Our VRSF intercooler features 3D CAD designed cast aluminum end tanks for improved flow in comparison to sheet metal end tanks. Our one peice seamless cast end tanks are also more durable than comparable sheet metal or multiple peice end tanks. Every VRSF intercooler is finished in a beautiful, uniform, bright silver coating which helps protect the intercooler from corrosion and ensures your VRSF intercooler holds up to the elements, no matter where you live.
Every VRSF product includes our lifetime warranty & our "No Hassle" satisfaction guarantee which includes fitment & defects.
Both VRSF intercoolers feature tabs that allow the retention of the factory fan shroud. We also include additional mounting hardware for extra support. We include everything required to repalce the OEM intercooler, including custom molded couplers and stainless steel t-bolt clamps necessary for installation. Please note that Z4 & 535i models will require additional hardware to complete the install. Instructions can be found here for the 535i and here for the Z4..
The 5" stepped core unit does not require trimming of the black plastic shroud (minimal trimming may be required on some models) . The 7" requires trimming of the black plastic shroud behind the bumper. The bumper does not require trimming with either models. Each VRSF intercooler is hand finished and pressure tested to ensure a high quality, leak free experience. Our intercoolers fit both Left Hand Drive (LHD) & Right Hand Drive (RHD) Models as well as all XI models.
- High Desnity Bar & Plate Core
- Cast Aluminum End Tanks
- Up to 80% larger than the OEM intercooler
- Easy install, less than 2.5 hours
- Includes lifetime warranty
- Dimensions: 7" - 20x5.75x7.125" / 5" - 20x8x5"
Fits the following BMWs
2007-2011 E90/E91/E92/E93 BMW 335i/xi
2011-2012 E92 BMW 335is
2008-2011 E82 BMW 135i