Adam's 4" White Foam Pad (2 Pack)
As machine polishers have advanced, so have the demands of the pads that attach to them. Adam’s is proud to introduce our Generation 6 Foam Pad System.
Each aspect of the pad design has been carefully considered to deliver maximum performance, durability, and results. Featuring a high-grip velcro backing for maximum adhesion and minimal pad slip, these pads will hold tighter to your machine reducing the chances of an errant pad or mid-polishing delamination in even the most extreme conditions.
We listened to feedback and eliminated the neoprene mid-base section that some users found difficult to avoid putting rubber transfer marks onto the vehicle surface if the side of the pad was accidentally bumped against a panel, which could cause a scare and be somewhat difficult to remove. The convoluted face generates less heat, and the tapered edge design provides stability that will withstand the rigors of high speeds from a cordless drill and Adam's 4" Drill Backing Plate or the oscillations from the Cyclo Model 5 or Rupes Mini polishers. They now have a lower price too!
Paint Finishing Polish is the 2nd step in our two-part paint correction system, and arguably the most important as you refine your paint to a high gloss and reveal a mirror like, flawless reflection. Adam's 4" White Foam Finishing Pads utilize a premium quality closed cell white foam that was purposely chosen for its fine finishing characteristics and structural stability, providing the power to remove light imperfections and refine the paint after the correcting stage. The Generation 6 Pad design provides superior stability on all machine types and an increased foot print to cover more space in less passes.
Extensive testing and development was done to make sure that each aspect of the Adam's 6th Generation foam pad system maximized performance on a variety of polishers, so matter what tool you choose to use rest assured that you'll see maximum performance. The Adam's 4" White Foam Finishing Pads work perfect with the Cyclo Model 5 Pro Mark II, Rupes 75e Mini, or Adam's 4" Drill Pad Backing Plates.