ServFaces Ceramic Coat Ultima
Ceramic Coat Ultima is the hardest silicon high-performance coating from servFaces. It was originally developed for industrial use and emerged in 2009 as the ultimate protection for painted surfaces.
The product attaches itself directly to the paint molecule, improves the dirt-repellent characteristics of the surface and forms a wafer-thin non-stick protective coating that is extremely hard and resilient in its characteristics.
Ceramic Coat Ultima deepens the shine and depth of colour of the surface. The primary focus is placed on protecting all painted surfaces against damage such as micro-scratches, oxidation, salt, acid, bird droppings and insects. Ceramic Coat Ultima exhibits long-term stability and cannot be removed by strong washing chemicals. Only extensive abrasion is able to destroy the surface coating.
With Ceramic Coat Ultima you enjoy the perfect protection for your painted surface, whilst also contributing to environmental protection.
Ceramic Coat Ultima:
- Permanent protection
- Resistant to cleaning products and environmentally stable (pH value 2-13)
- Increases hardness and scratch-resistance
- Resistant to washing systems
- Very high abrasion-resistance
- UV & temperature-resistant
- Easy-to-clean surface
- Unique shine
- Increases colour depth
- High surface beading
- Colourless and transparent liquid
- Free from siloxane, Teflon, wax, silicone
- Temperature-resistant and corrosion-resistant
- No carcinogenic constituents
Product life:
Depending on the mileage driven and the washing behaviour, the durability is 11 to 16 months
Treatment:
Apply the product with the application cloth and applicator in small sections until a thin film is formed (you can treat the entire vehicle).
After approx. 10 to 20 minutes you can polish out the milky excess with the servFaces finishing cloth. Should this process prove to be difficult, then remove the dripping cap from the bottle and replace it with the spray head. Spray 1-2 times into the microfibre cloth and repeat the process. The excess is released with the fresh material and in this manner can be polished out easily.
The vehicle is ready for use again after a drying time of 2 hours.
Application instructions for servFaces Ceramic Coat Ultima + Final Clean surfaces and remove grease. Recommendation - Clean with Ultima surface cleaner and then neutralise with Neutra Cleaner.
Please ensure that the surface is completely free of oils, waxes, silicone and surfactants - otherwise our high-performance coating will not bond with the surface of the paint. Add 12 - 15 drops of servFaces Ceramic Coat Ultima to the applicator.
Apply Ceramic Coat Ultima evenly to the surface to be protected until a sealed, visible film is created. Always work in small sections.
We recommend 60 x 60 or component by component 1. Coating Immediately wipe away after applying or after a flash-off time of 1 minute with the special coating towel to ensure it is clean and streak-free. In order to ensure that the paint has bonded with the coating, test it with the microfiber cloth (cloth encounters resistance).
It is best to use three individual cloths. Maintaining intervals between additional coats You can apply a further coat of Ceramic Coat Ultra after a drying time of at least 35 minutes. Do not wait more than 60 minutes as this risks the previous coat drying out too much. Application instructions for servFaces Ceramic Coat Ultima + Final Once the work has been completed, no foreign materials may come into contact with the surface for 18 hours.
For example, finger grease, liquids, water. After a setting period of at least 3 to 6 hours (depending on the temperature) you can coat the surface with Final. Final smooths the surface and provides an even deeper gloss. A further coat of Final can be applied after 90 minutes,
